AFL-xxA-N270 Series Panel PC Page I 42AFL-xxA-N270 Series Flat Panel PC MODEL: AFL-xxA-N270Fanless All-in-one Panel PC with 1.6 GHz Intel® Atom™ Pro
AFL-xxA-N270 Series Panel PCPage X 6.3.2 IDE Configuration ...
AFL-xxA-N270 Series Panel PCPage 84 Suspend Mode [S1(POS)] Use the Suspend Mode BIOS option to specify the sleep state the system enters when it
AFL-xxA-N270 Series Panel PC Page 85 Power Off The system remains turned off Power On The system turns on Last State DEFAULT The system r
AFL-xxA-N270 Series Panel PCPage 86 Disabled DEFAULT Wake event not generated by an incoming call Enabled Wake event generated by an incoming
AFL-xxA-N270 Series Panel PC Page 87 BIOS Menu 11: Remote Access Configuration [Advanced] Remote Access [Disabled] Use the Remote Access option
AFL-xxA-N270 Series Panel PCPage 88 Serial Port Number [COM1] Use the Serial Port Number option allows to select the serial port used for remote
AFL-xxA-N270 Series Panel PC Page 89 Disabled The console is not redirected after POST Boot Loader Redirection is active during POST and dur
AFL-xxA-N270 Series Panel PCPage 90 USB Functions [Enabled] Use the USB Function option to enable or disable the USB controllers. Disabled USB
AFL-xxA-N270 Series Panel PC Page 91 HiSpeed DEFAULT The controller is capable of operating at high speed 480 Mb/s 6.4 PCI/PnP Use the PCI/PnP men
AFL-xxA-N270 Series Panel PCPage 92 Reserved The specified IRQ is reserved for use by Legacy ISA devices Available IRQ addresses are: IRQ3 I
AFL-xxA-N270 Series Panel PC Page 93 Reserved Memory Size [Disabled] Use the Reserved Memory Size BIOS option to specify the amount of memory tha
AFL-xxA-N270 Series Panel PC Page XI B SAFETY PRECAUTIONS ... 13
AFL-xxA-N270 Series Panel PCPage 94 BIOS Menu 15: Boot Settings Configuration Quick Boot [Enabled] Use the Quick Boot BIOS option to make the co
AFL-xxA-N270 Series Panel PC Page 95 AddOn ROM Display Mode [Force BIOS] The AddOn ROM Display Mode option allows add-on ROM (read-only memory)
AFL-xxA-N270 Series Panel PCPage 96 6.6 Security Use the Security menu (6BIOS Menu 16) to set system and user passwords. BIOS Menu 16: Security
AFL-xxA-N270 Series Panel PC Page 97 6.7 Chipset Use the Chipset menu (6BIOS Menu 17) to access the NorthBridge and SouthBridge configuration menus
AFL-xxA-N270 Series Panel PCPage 98 BIOS Menu 18:North Bridge Chipset Configuration Memory Hole [Disabled] The Memory Hole reserves the memory
AFL-xxA-N270 Series Panel PC Page 99 DVMT Mode Select [DVMT Mode] Use the DVMT Mode Select option to select the Intel Dynamic Video Memory Techno
AFL-xxA-N270 Series Panel PCPage 100 Sec. Display Device [CRT] Use the Sec. Display Device option to select the second display device used by the
AFL-xxA-N270 Series Panel PC Page 101 BIOS Menu 19: SouthBridge Chipset Configuration Audio Controller [AC’97 Audio Only] The Audio Controller o
AFL-xxA-N270 Series Panel PCPage 102 BIOS Menu 20:Exit Save Changes and Exit Use the Save Changes and Exit option to save the changes made t
AFL-xxA-N270 Series Panel PC Page 103 Load Failsafe Defaults Use the Load Failsafe Defaults option to load failsafe default values for each of th
AFL-xxA-N270 Series Panel PCPage XII List of Figures Figure 1-1: AFOLUX AFL-xxA-N270 Flat Panel PC...
AFL-xxA-N270 Series Panel PCPage 104 7 Software Drivers Chapter 7
AFL-xxA-N270 Series Panel PC Page 105 7.1 Available Software Drivers NOTE: The content of the CD may vary throughout the life cycle of the product
AFL-xxA-N270 Series Panel PCPage 106 Figure 7-1: Drivers 7.3 Chipset Driver Installation To install the chipset driver, please do the following. St
AFL-xxA-N270 Series Panel PC Page 107 Figure 7-2: Chipset Driver Screen Step 4: When the setup files are completely extracted the Welcome Screen i
AFL-xxA-N270 Series Panel PCPage 108 Step 6: The license agreement in Figure 7-4 appears. Step 7: Read the License Agreement. Step 8: Click the
AFL-xxA-N270 Series Panel PC Page 109 Figure 7-5: Chipset Driver Read Me File Step 11: Setup Operations are performed as shown in Figure 7-6.
AFL-xxA-N270 Series Panel PCPage 110 Figure 7-6: Chipset Driver Setup Operations Step 12: Once the Setup Operations are complete, click the Next ic
AFL-xxA-N270 Series Panel PC Page 111 Figure 7-7: Chipset Driver Installation Finish Screen 7.4 VGA Driver Installation To install the VGA driver,
AFL-xxA-N270 Series Panel PCPage 112 Figure 7-8: VGA Driver Read Me File Step 5: The installation files are extracted. See Figure 7-9. Figure 7-9
AFL-xxA-N270 Series Panel PC Page 113 Figure 7-10: VGA Driver Welcome Screen Step 7: Click Next to continue. Step 8: The license agreement in Fig
AFL-xxA-N270 Series Panel PC Page XIII Figure 4-13: Chassis Support Screws...
AFL-xxA-N270 Series Panel PCPage 114 Figure 7-11: VGA Driver License Agreement Step 11: The Read Me file in Figure 7-12 appears. Step 12: Click Nex
AFL-xxA-N270 Series Panel PC Page 115 Figure 7-13: VGA Driver Setup Operations Step 14: Once the Setup Operations are complete, click the Next icon
AFL-xxA-N270 Series Panel PCPage 116 7.5 Audio Driver Installation To install the audio driver, please do the following. Step 1: Access the driver
AFL-xxA-N270 Series Panel PC Page 117 Figure 7-16: AC’97 Driver Installation Welcome Screen Step 7: The Verification window in Figure 7-17 may app
AFL-xxA-N270 Series Panel PCPage 118 Figure 7-18: AC’97 Driver Installation Step 10: When the driver is installed, the driver installation finish
AFL-xxA-N270 Series Panel PC Page 119 Step 2: Click “LAN” and locate the setup.exe. Double click the setup.exe file to start installing the LAN dri
AFL-xxA-N270 Series Panel PCPage 120 Figure 7-21: LAN Driver Welcome Screen Step 7: The program begins to install. Step 8: The installation progr
AFL-xxA-N270 Series Panel PC Page 121 Step 9: When the driver installation is complete, the screen in Figure 7-23 appears.Step 0: Figure 7-23: LAN
AFL-xxA-N270 Series Panel PCPage 122 Figure 7-24: Welcome Screen Step 4: The license agreement shown in Figure 7-25 appears. Agree to the license b
AFL-xxA-N270 Series Panel PC Page 123 Figure 7-26: Ready to Install the Program Step 6: Click INSTALL to continue. The Installing PenMount DMC9000
AFL-xxA-N270 Series Panel PCPage XIV Figure 7-18: AC’97 Driver Installation Welcome Screen... 1
AFL-xxA-N270 Series Panel PCPage 124 Figure 7-28: Reboot the Computer 7.8 Bluetooth Driver To install the Bluetooth software driver, please follow
AFL-xxA-N270 Series Panel PC Page 125 Step 3: A welcome screen appears (Figure 7-30). To continue the installation process click NEXT. Figure 7-30:
AFL-xxA-N270 Series Panel PCPage 126 Figure 7-32: Bluetooth Driver Setup Options Step 6: Select the required installation configuration in Figure
AFL-xxA-N270 Series Panel PC Page 127 Step 8: Click NEXT and the Installshield Wizard is ready to install the program (Figure 7-34). Figure 7-34:
AFL-xxA-N270 Series Panel PCPage 128 Figure 7-36: Bluetooth Driver Complete Installation Screen Step 11: To complete the chipset driver installatio
AFL-xxA-N270 Series Panel PC Page 129 . Figure 7-38: Wireless Driver OS Folders Step 3: The license agreement in Figure 7-39 appears. Figure 7-39
AFL-xxA-N270 Series Panel PCPage 130 Figure 7-40: Wireless Driver Configuration Tool Options Step 6: Select configuration tool in Figure 7-40 and
AFL-xxA-N270 Series Panel PC Page 131 Step 9: Click INSTALL in Figure 7-42 to start to install the driver. Figure 7-42: Wireless Driver Installati
AFL-xxA-N270 Series Panel PCPage 132 A System Specifications Appendix A
AFL-xxA-N270 Series Panel PC Page 133 A.1 Motherboard Specifications The system comes with an IEI AFLMB-945GSE motherboard. The detailed specificati
AFL-xxA-N270 Series Panel PC Page XV List of Tables Table 1-1: Model Variations...
AFL-xxA-N270 Series Panel PCPage 134 Manufacturing Technology 45 nm L1 Cache 32 KB instruction cache 24 KB write-back data cache Thermal Design Pow
AFL-xxA-N270 Series Panel PC Page 135 A.4 Touch Screen Specifications The AFL-xxA-N270 series comes with an analog resistive type touch panel. The t
AFL-xxA-N270 Series Panel PCPage 136 A.5 Bluetooth Module Specifications The specifications for the Bluetooth module on the AFL-xxA-N270 are shown b
AFL-xxA-N270 Series Panel PC Page 137 B Safety Precautions Appendix B
AFL-xxA-N270 Series Panel PCPage 138 WARNING: The precautions outlined in this chapter should be strictly followed. Failure to follow these precau
AFL-xxA-N270 Series Panel PC Page 139 B.1.2 Anti-static Precautions WARNING: Failure to take ESD precautions during the installation of the AFOLUX
AFL-xxA-N270 Series Panel PCPage 140 Except for the LCD panel, never spray or squirt liquids directly onto any other components. To clean the LCD
AFL-xxA-N270 Series Panel PC Page 141 Foam swabs - Whenever possible, it is best to use lint free swabs such as foam swabs for cleaning.
AFL-xxA-N270 Series Panel PCPage 142 C BIOS Configuration Options Appendix C
AFL-xxA-N270 Series Panel PC Page 143 C.1 BIOS Configuration Options Below is a list of BIOS configuration options described in Chapter 6. Syst
AFL-xxA-N270 Series Panel PCPage 144 Resume on Ring [Disabled] ...
AFL-xxA-N270 Series Panel PC Page 145 LFP Panel Type [by H/W]...
AFL-xxA-N270 Series Panel PCPage 146 D Watchdog Timer Appendix D
AFL-xxA-N270 Series Panel PC Page 147 NOTE: The following discussion applies to DOS environment. IEI support is contacted or the IEI website v
AFL-xxA-N270 Series Panel PCPage 148 NOTE: When exiting a program it is necessary to disable the Watchdog Timer, otherwise the system resets. Exam
AFL-xxA-N270 Series Panel PC Page 149 E Hazardous Materials Disclosure Appendix E
AFL-xxA-N270 Series Panel PCPage 150 E.1 Hazardous Material Disclosure Table for IPB Products Certified as RoHS Compliant Under 2002/95/EC Without M
AFL-xxA-N270 Series Panel PC Page 151 Toxic or Hazardous Substances and Elements Part Name Lead (Pb) Mercury (Hg) Cadmium (Cd) Hexavalent Chromium
AFL-xxA-N270 Series Panel PCPage 152 此附件旨在确保本产品符合中国 RoHS 标准。以下表格标示此产品中某有毒物质的含量符合中国 RoHS 标准规定的限量要求。 本产品上会附有”环境友好使用期限”的标签,此期限是估算这些物质”不会有泄漏或突变”的年限。本产品可
AFL-xxA-N270 Series Panel PC Page 153 F Index
AFL-xxA-N270 Series Panel PC Page 1 1 Introduction Chapter 1
AFL-xxA-N270 Series Panel PCPage 154 A ABS/PC plastic frame ...4, 51 ACPI ...
AFL-xxA-N270 Series Panel PC Page 155 H HDD ...33 I IrDA...
AFL-xxA-N270 Series Panel PCPage 2 1.1 AFOLUX AFL-xxA-N270 Series Flat Panel PC Overview Figure 1-1: AFOLUX AFL-xxA-N270 Flat Panel PC The AFL-xxA-
AFL-xxA-N270 Series Panel PC Page 3 802.11 b/g wireless module Two USB 2.0 ports Watchdog timer that triggers a system reset if the system
AFL-xxA-N270 Series Panel PCPage II Revision Date Version Changes 12 November, 2009 1.03 Added wall mount screw warning in page 45 5 October, 2009
AFL-xxA-N270 Series Panel PCPage 4 AFL-xxA-N270 provides access to external interface connectors that include LAN, USB 2.0, serial port, reset butto
AFL-xxA-N270 Series Panel PC Page 5 1.2.4 I/O Interface Panel The I/O interface panel located on the bottom of the AFL-xxA-N270 has the following I/
AFL-xxA-N270 Series Panel PCPage 6 1.2.5 Top Panel and Side Panels The top panel and side panels of AFOLUX AFL-xxA-N270 series provides access to sl
AFL-xxA-N270 Series Panel PC Page 7 1.4 System Specifications The technical specifications for the AFOLUX AFL-xxA-N270 series systems are listed in
AFL-xxA-N270 Series Panel PCPage 8 Operation Temperature -10ºC ~ 50ºC with CF card -10ºC ~ 50ºC with CF card 0ºC ~ 40ºC with HDD Storage Temperatu
AFL-xxA-N270 Series Panel PC Page 9 2 Detailed Specifications Chapter 2
AFL-xxA-N270 Series Panel PCPage 10 2.1 Dimensions The following sections provide detailed schematics and information on the dimensions of the AFL-x
AFL-xxA-N270 Series Panel PC Page 11 2.1.2 AFL-08AH-N270 Dimensions The AFL-08AH-N270 dimensions are shown in Figure 2-2 and listed below. Width:
AFL-xxA-N270 Series Panel PCPage 12 2.1.3 AFL-10A-N270 Dimensions The AFL-10A-N270 dimensions are shown in Figure 2-3 and listed below. Width: 27
AFL-xxA-N270 Series Panel PC Page 13 2.1.4 AFL-12A-N270 Dimensions The AFL-12A-N270 dimensions are shown in Figure 2-3 and listed below. Width:
AFL-xxA-N270 Series Panel PC Page III Copyright COPYRIGHT NOTICE The information in this document is subject to change without prior notice in order
AFL-xxA-N270 Series Panel PCPage 14 2.2 Intel® Atom™ Processor A 45nm N270 Intel® Atom™ processor is installed in the system. The processor has a CP
AFL-xxA-N270 Series Panel PC Page 15 Figure 2-5: Preinstalled DDR2 SO-DIMM 2.3.1.2 Additional Memory The Intel® 945GSE is capable of supporting one
AFL-xxA-N270 Series Panel PCPage 16 a 5 V or 12 V power supply. Enabling COM devices to be powered through the COM port eliminates unnecessary and m
AFL-xxA-N270 Series Panel PC Page 17 Supports IEEE 802.1Q VLAN tagging Serial EEPROM Transmit/Receive on-chip buffer support 64-pin QFN p
AFL-xxA-N270 Series Panel PCPage 18 Figure 2-9: LCD Screen 2.5.2 Touch-Screen Module A controller for the 4-wire/5-wire resistive touch screen is i
AFL-xxA-N270 Series Panel PC Page 19 2.6.2 Stereo Speakers Two internal 1.5 W stereo speakers on the sides of the AFL-xxA-N270 are interfaced to the
AFL-xxA-N270 Series Panel PCPage 20 2.7.1.2 AT Power Mode With the AT mode selected, the power is controlled by a central power unit rather than a p
AFL-xxA-N270 Series Panel PC Page 21 2.8 Wireless Connections The following section describes the wireless modules on the circuit. 2.8.1 USB Bluetoo
AFL-xxA-N270 Series Panel PCPage 22 Figure 2-13: PIFA Antenna and Wireless Module
AFL-xxA-N270 Series Panel PC Page 23 3 Unpacking Chapter 3
AFL-xxA-N270 Series Panel PCPage IV Manual Conventions WARNING! Warnings appear where overlooked details may cause damage to the equipment or resul
AFL-xxA-N270 Series Panel PCPage 24 3.1 Unpacking To unpack the flat panel PC, follow the steps below: WARNING! The front side LCD screen has a pro
AFL-xxA-N270 Series Panel PC Page 25 3.1.1 Packing List The AFL-xxA-N270 flat panel PC is shipped with the following components: Quantity Item Ima
AFL-xxA-N270 Series Panel PCPage 26 Optional Panel mounting kit (P/N: AFLPK-12) Wall mounting kit (P/N: AFLWK-12) Stand (P/N:STAND-A12) Stand (
AFL-xxA-N270 Series Panel PC Page 27 Arm (P/N: ARM-31-RS) If any of these items are missing or damaged, contact the distributor or sales representa
AFL-xxA-N270 Series Panel PCPage 28 4 Installation Chapter 4
AFL-xxA-N270 Series Panel PC Page 29 4.1 Anti-static Precautions WARNING: Failure to take ESD precautions during the maintenance of the AFL-xxA-N27
AFL-xxA-N270 Series Panel PCPage 30 Anti-static Discharge: If a user open the rear panel of the flat panel PC, to configure the jumpers or plug i
AFL-xxA-N270 Series Panel PC Page 31 4.5 Removing the Back Cover WARNING: Over-tightening back cover screws will crack the plastic frame. Maximum t
AFL-xxA-N270 Series Panel PCPage 32 4.6 CF Card Installation The AFL-xxA-N270 series has one CF Type II slot inside the rear panel. To install the C
AFL-xxA-N270 Series Panel PC Page 33 4.7 HDD Installation (AF-12A-N270 Only) To install the HDD into the AF-12A-N270, please follow the steps below:
AFL-xxA-N270 Series Panel PC Page V CAUTION: This is an example of a caution message. Failure to adhere to cautions messages may result in permane
AFL-xxA-N270 Series Panel PCPage 34 WARNING: Over-tightening back cover screws will crack the plastic frame. Maximum torque for cover screws is 5 k
AFL-xxA-N270 Series Panel PC Page 35 ATM Self-service kiosk Plant environment monitoring system Factory automation platform Manufacturi
AFL-xxA-N270 Series Panel PCPage 36 Description Label Type Clear CMOS J_COMS1 2-pin header COM1 Pin 9 setting JP8 10-pin header COM3 Pin 9 set
AFL-xxA-N270 Series Panel PC Page 37 4.9.3 Clear CMOS Jumper Jumper Label: J_CMOS1 Jumper Type: 2-pin header Jumper Settings: See Table 4-3 Jumper L
AFL-xxA-N270 Series Panel PCPage 38 Figure 4-7: Clear CMOS Jumper 4.9.4 COM Port Pin 9 Select Jumper Label: JP8 and JP10 Jumper Settings: See Table
AFL-xxA-N270 Series Panel PC Page 39 The COM1 and COM3 Pin 9 Setting jumper locations are shown in Figure 4-8 below. Figure 4-8: COM1 and COM3 Pin
AFL-xxA-N270 Series Panel PCPage 40 4.9.5 COM3 RX Function Select Jumper Jumper Label: JP9 Jumper Type: 8-pin header Jumper Settings: See Table 4-8
AFL-xxA-N270 Series Panel PC Page 41 4.9.6 COM3 TX Function Select Jumper Jumper Label: JP11 Jumper Type: 6-pin header Jumper Settings: See Table 4-
AFL-xxA-N270 Series Panel PCPage 42 4.9.7 COM3 RS-232/422/485 Serial Port Select Jumper Jumper Label: JP6 Jumper Type: 12-pin header (four 3-pin hea
AFL-xxA-N270 Series Panel PC Page 43 Figure 4-11: COM3 RS-232/422/485 Serial Port Select Jumper Location 4.10 Mounting the System WARNING! When m
AFL-xxA-N270 Series Panel PCPage VI Packing List NOTE: If any of the components listed in the checklist below are missing, please do not proceed
AFL-xxA-N270 Series Panel PCPage 44 4.10.1 Wall Mounting To mount the flat panel PC onto the wall, please follow the steps below. Step 1: Select th
AFL-xxA-N270 Series Panel PC Page 45 Step 6: Insert the four monitor mounting screws provided in the wall mount kit into the four screw holes on th
AFL-xxA-N270 Series Panel PCPage 46 Figure 4-13: Chassis Support Screws Step 9: Secure the panel PC by fastening the retention screw of the wall-m
AFL-xxA-N270 Series Panel PC Page 47 4.10.2 Panel Mounting To mount the AFOLUX AFL-xxA-N270 series flat panel PC into a panel, please follow the ste
AFL-xxA-N270 Series Panel PCPage 48 Figure 4-17: AFL-10A-N270 Panel Opening Figure 4-18: AFL-12A-N270 Panel Opening Step 3: Slide the flat panel
AFL-xxA-N270 Series Panel PC Page 49 Figure 4-19: Tighten the Panel Mounting Clamp Screws 4.10.3 Arm Mounting The AFL-xxA-N270 series is VESA (Vide
AFL-xxA-N270 Series Panel PCPage 50 Step 2: Once the mounting arm has been firmly attached to the surface, lift the flat panel PC onto the interfac
AFL-xxA-N270 Series Panel PC Page 51 Step 4: Secure the flat panel PC to the interface pad by inserting four retention screws through the bottom of
AFL-xxA-N270 Series Panel PCPage 52 mounting clamps for AFL-07A-N270/ AFL-08AH-N270 and 6 rack mounting clamps for AFL-10A-N270/AFL-12A-N270. Step 3
AFL-xxA-N270 Series Panel PC Page 53 Figure 4-24: Install into a Rack/Cabinet Step 5: Once the flat panel PC with the attached rack/cabinet bracke
AFL-xxA-N270 Series Panel PC Page VII Table of Contents 1 INTRODUCTION...
AFL-xxA-N270 Series Panel PCPage 54 Figure 4-25: LAN Connection Step 3: Insert the LAN cable RJ-45 connector. Once aligned, gently insert the LAN
AFL-xxA-N270 Series Panel PC Page 55 Figure 4-26: Serial Device Connector Step 3: Secure the connector. Secure the serial device connector to the
AFL-xxA-N270 Series Panel PCPage 56 4.11.3 USB Device Connection There are two external USB 2.0 connectors. All connectors are perpendicular to th
AFL-xxA-N270 Series Panel PC Page 57 5 System Maintenance Chapter 5
AFL-xxA-N270 Series Panel PCPage 58 5.1 System Maintenance Introduction If the components of the AFOLUX AFL-xxA-N270 series fail they must be replac
AFL-xxA-N270 Series Panel PC Page 59 Only handle the edges of the PCB: - When handling the PCB, hold the PCB by the edges. 5.3 Turn off the Power
AFL-xxA-N270 Series Panel PCPage 60 Figure 5-1: Back Cover Retention Screws Step 4: Lift the cover off and pull down the cover a bit to make it
AFL-xxA-N270 Series Panel PC Page 61 Figure 5-3: AFL-10A-N270 Aluminum Back Cover Retention Screws Step 2: Lift the aluminum cover off the AFL-xx
AFL-xxA-N270 Series Panel PCPage 62 Step 4: Remove the DDR memory module by pulling both the spring retainer clips outward from the socket. Step 5:
AFL-xxA-N270 Series Panel PC Page 63 5.6 Reinstalling the Covers WARNING: Failing to reinstall the covers may result in permanent damage to the sys
AFL-xxA-N270 Series Panel PCPage VIII 2.5.2 Touch-Screen Module...
AFL-xxA-N270 Series Panel PCPage 64 6 AMI BIOS Setup Chapter 6
AFL-xxA-N270 Series Panel PC Page 65 6.1 Introduction A licensed copy of AMI BIOS is preprogrammed into the ROM BIOS. The BIOS setup program allows
AFL-xxA-N270 Series Panel PCPage 66 F1 key General help, only for Status Page Setup Menu and Option Page Setup Menu F2 /F3 key Change color from t
AFL-xxA-N270 Series Panel PC Page 67 6.2 Main The Main BIOS menu (6BIOS Menu 1) appears when the BIOS Setup program is entered. The Main menu gives
AFL-xxA-N270 Series Panel PCPage 68 The System Overview field also has two user configurable fields: System Time [xx:xx:xx] Use the System Time o
AFL-xxA-N270 Series Panel PC Page 69 BIOS Menu 2: Advanced 6.3.1 CPU Configuration Use the CPU Configuration menu (6BIOS Menu 3) to view detailed C
AFL-xxA-N270 Series Panel PCPage 70 The CPU Configuration menu (BIOS Menu 3) lists the following CPU details: Manufacturer: Lists the name of the
AFL-xxA-N270 Series Panel PC Page 71 compatible mode. In this mode, a SATA channel will replace one of the IDE channels. This mode supports up to 4
AFL-xxA-N270 Series Panel PCPage 72 6.3.2.1 IDE Master, IDE Slave Use the IDE Master and IDE Slave configuration menu to view both primary and secon
AFL-xxA-N270 Series Panel PC Page 73 LBA Mode: Indicates whether the LBA (Logical Block Addressing) is a method of addressing data on a disk driv
AFL-xxA-N270 Series Panel PC Page IX 4.9.5 COM3 RX Function Select Jumper... 40 4.9.6
AFL-xxA-N270 Series Panel PCPage 74 LBA/Large Mode [Auto] Use the LBA/Large Mode option to disable or enable BIOS to auto detects LBA (Logical Bl
AFL-xxA-N270 Series Panel PC Page 75 3 PIO mode 3 selected with a maximum transfer rate of 11.1MBps 4 PIO mode 4 selected with a maximum tran
AFL-xxA-N270 Series Panel PCPage 76 rate of 44MBps (To use this mode, it is required that an 80-conductor ATA cable is used.) UDMA4 Ultra DMA mo
AFL-xxA-N270 Series Panel PC Page 77 BIOS Menu 6: Super IO Configuration Serial Port1 Address [3F8/IRQ4] Use the Serial Port1 Address option to
AFL-xxA-N270 Series Panel PCPage 78 Normal DEFAULTSerial Port 1 mode is normal IrDA Serial Port 1 mode is IrDA ASK IR Serial Port 1 mode
AFL-xxA-N270 Series Panel PC Page 79 6.3.4 Hardware Health Configuration The Hardware Health Configuration menu (6BIOS Menu 7) shows the operating
AFL-xxA-N270 Series Panel PCPage 80 CPU Temp. Limit of Start CPU Fan Start PWM Slope PWM When the CPU FAN Mode Setting option is in the PWM
AFL-xxA-N270 Series Panel PC Page 81 The CPU Temp. Limit of Start option can only be set if the CPU FAN Mode Setting option is set to Automatic Mod
AFL-xxA-N270 Series Panel PCPage 82 15 PWM The following system parameters and values are shown. The system parameters that are monitored are:
AFL-xxA-N270 Series Panel PC Page 83 BIOS Menu 8: Power Configuration 6.3.5.1 ACPI configuration The ACPI Configuration menu (6BIOS Menu 9) configu
Comments to this Manuals