Iei-integration TANK-700-QM67 v1.00 User Manual

TANK-700 Embedded System Page iIEI Technology Corp. User Manual MODEL: TANK-700 High Performance Fanless Embedded System with Intel® 32nm CPU, On

TANK-700 Embedded SystemPage x Figure A-18: Image Creation Confirmation...

TANK-700 Embedded System Page 89Step 4: Turn on the system. Step 5: Press the <DELETE> key as soon as the system is turned on to enter the B

TANK-700 Embedded SystemPage 90 Step 3: The recovery tool setup menu is shown as below. Figure A-3: Recovery Tool Setup Menu Step 4: Press <5&

TANK-700 Embedded System Page 91system32>format F: /fs:ntfs /q /v:Recovery /y system32>exit Figure A-5: Partition Creation Commands

TANK-700 Embedded SystemPage 92 NOTE: Use the following commands to check if the partitions were created successfully. Step 6: Press any key to e

TANK-700 Embedded System Page 93A.2.4 Build-up Recovery Partition Step 1: Put the recover CD in the optical drive. Step 2: Start the system. Step

TANK-700 Embedded SystemPage 94 recovery files in Section 75A.2.2 is hidden and the recovery tool is saved in this partition. Figure A-8: Build-up

TANK-700 Embedded System Page 95A.2.5 Create Factory Default Image NOTE: Before creating the factory default image, please configure the system to

TANK-700 Embedded SystemPage 96 Figure A-12: About Symantec Ghost Window Step 4: Use mouse to navigate to the option shown below (75Figure A-13).

TANK-700 Embedded System Page 97Figure A-14: Select a Local Source Drive Step 6: Select a source partition (Part 1) from basic drive as shown in 75

TANK-700 Embedded SystemPage 98 Figure A-16: File Name to Copy Image to Step 8: When the Compress Image screen in 75Figure A-17 prompts, click Hig

TANK-700 Embedded System Page xiList of Tables Table 1-1: TANK-700 Model Variations...

TANK-700 Embedded System Page 99Step 9: The Proceed with partition image creation window appears, click Yes to continue. Figure A-18: Image Creati

TANK-700 Embedded SystemPage 100 Step 12: The recovery tool main menu window is shown as below. Press any key to reboot the system. Step 0: Fig

TANK-700 Embedded System Page 101 NOTE: Please reserve enough space for partition 3 for saving recovery images. Figure A-22: Partitions for Linux

TANK-700 Embedded SystemPage 102 Figure A-23: System Configuration for Linux Step 5: Access the recovery tool main menu by modifying the “menu.lst

TANK-700 Embedded System Page 103 Step 7: The recovery tool menu appears. (75Figure A-25) Figure A-25: Recovery Tool Menu Step 8: Create a factor

TANK-700 Embedded SystemPage 104 Figure A-26: Recovery Tool Main Menu The recovery tool has several functions including: 1. Factory Restore: Restor

TANK-700 Embedded System Page 105A.4.1 Factory Restore To restore the factory default image, please follow the steps below. Step 1: Type <1>

TANK-700 Embedded SystemPage 106 A.4.2 Backup System To backup the system, please follow the steps below. Step 1: Type <2> and press <Ente

TANK-700 Embedded System Page 107A.4.3 Restore Your Last Backup To restore the last system backup, please follow the steps below. Step 1: Type <

TANK-700 Embedded SystemPage 108 A.4.4 Manual To restore the last system backup, please follow the steps below. Step 1: Type <4> and press &l

TANK-700 Embedded System Page 1Chapter 1 1 Introduction

TANK-700 Embedded System Page 109Appendix B B Safety Precautions

TANK-700 Embedded SystemPage 110 B.1 Safety Precautions WARNING: The precautions outlined in this appendix should be strictly followed. Failure to

TANK-700 Embedded System Page 111B.1.2 Anti-static Precautions WARNING: Failure to take ESD precautions during the installation of the TANK-700 may

TANK-700 Embedded SystemPage 112 B.1.3 Product Disposal CAUTION: Risk of explosion if battery is replaced by and incorrect type. Only certified eng

TANK-700 Embedded System Page 113 Be cautious of all small removable components when vacuuming the TANK-700.  Turn the TANK-700 off before clean

TANK-700 Embedded SystemPage 114 Appendix C C Hazardous Materials Disclosure

TANK-700 Embedded System Page 115C.1 Hazardous Materials Disclosure Table for IPB Products Certified as RoHS Compliant Under 2002/95/EC Without Merc

TANK-700 Embedded SystemPage 116 Toxic or Hazardous Substances and Elements Part Name Lead (Pb) Mercury (Hg) Cadmium(Cd) Hexavalent Chromium(CR(VI))

TANK-700 Embedded System Page 117此附件旨在确保本产品符合中国 RoHS 标准。以下表格标示此产品中某有毒物质的含量符合中国 RoHS 标准规定的限量要求。 本产品上会附有”环境友好使用期限”的标签，此期限是估算这些物质”不会有泄漏或突变”的年限。本产品可能包含有

TANK-700 Embedded SystemPage 2 1.1 Overview Figure 1-1: TANK-700 The TANK-700 Series fanless embedded system is powered by the Intel® 32nm mobile C

TANK-700 Embedded System Page 31.3 Features The TANK-700 features are listed below:  Intel® 32nm mobile Core i7/i5/i3 or Celeron® processor  I

TANK-700 Embedded SystemPage 4 Specifications I/O and Indicators Ethernet 2 x Combo (SFP Fiber/RJ-45) Gigabit LAN RS-232 4 x DB-9 serial ports on re

TANK-700 Embedded System Page 5Specifications Power Power Supply Redundant dual DC input 9V~36V Power Consumption [email protected] (Intel® Core™ i5-2540M pr

TANK-700 Embedded SystemPage 6 Figure 1-2: TANK-700 Front Panel 1.5.2 Rear Panel The TANK-700 rear panel contains:  1 x DIO port  1 x 2-pin ter

TANK-700 Embedded System Page 7 4 x USB 2.0 port connectors  1 x VGA output  1 x Wireless antenna connector An overview of the rear panel is s

TANK-700 Embedded SystemPage 8 NOTE: The TANK-700 provides two pairs of combo LANs. For each pair of combo LAN, only one LAN port can work at one t

TANK-700 Embedded SystemPage ii Revision Date Version Changes 17 October 2011 1.00 Initial release

TANK-700 Embedded System Page 91.7 Dimensions The physical dimensions are shown below: Figure 1-5: Physical Dimensions (millimeters)

TANK-700 Embedded SystemPage 10 Chapter 2 2 Unpacking

TANK-700 Embedded System Page 112.1 Anti-static Precautions WARNING: Failure to take ESD precautions during installation may result in permanent da

TANK-700 Embedded SystemPage 12 2.3 Unpacking Checklist NOTE: If some of the components listed in the checklist below are missing, please do not pr

TANK-700 Embedded System Page 13Quantity Item and Part Number Image Standard 8 Chassis screw (P/N: 44013-030041-RS) 4 RJ-45 to DB-9 COM port cab

TANK-700 Embedded SystemPage 14 The following table lists the optional items that can be purchased separately. Optional Gigabit Ethernet SFP module

TANK-700 Embedded System Page 15Chapter 3 3 Installation

TANK-700 Embedded SystemPage 16 3.1 Installation Precautions During installation, be aware of the precautions below:  Read the user manual: The us

TANK-700 Embedded System Page 17 Figure 3-1: Bottom Panel Retention Screws Step 2: Remove the 2 HDD bracket retention screws (Figure 3-2). Figure

TANK-700 Embedded SystemPage 18 Figure 3-3: HDD Installation Step 5: Slide the HDD bracket to connect the HDD to the SATA connector. Secure the HD

TANK-700 Embedded System Page iiiCopyright COPYRIGHT NOTICE The information in this document is subject to change without prior notice in order to i

TANK-700 Embedded System Page 19Step 2: Align the pluggable CAN-bus terminal block with the CAN-bus terminal block connector on the TANK-700. Step

TANK-700 Embedded SystemPage 20 Figure 3-6: Pluggable DC-in Terminal Block Installation 3.5 Pluggable Remote Control Terminal Block Installation To

TANK-700 Embedded System Page 21 Figure 3-7: Pluggable Remote Control Terminal Block Installation 3.6 SFP Module Installation To install an SFP modu

TANK-700 Embedded SystemPage 22 3.7 SO-DIMM Installation WARNING: Using incorrectly specified SO-DIMM may cause permanently damage the TANK-700. Pl

TANK-700 Embedded System Page 23 Figure 3-10: SO-DIMM Socket Step 4: Align the SO-DIMM with the socket. The SO-DIMM must be oriented in such a way

TANK-700 Embedded SystemPage 24 Step 8: Install the bracket that was previously removed in the same position it was before. Step 9: Reinstall the

TANK-700 Embedded System Page 253.9 External Peripheral Interface Connectors The TANK-700 has the following connectors. Detailed descriptions of the

TANK-700 Embedded SystemPage 26 3.9.1 ACC Mode Selection The TANK-700 allows turning the ACC mode on or off. The setting can be made through the ACC

TANK-700 Embedded System Page 273.9.3 Audio Connector CN Label: Line out and Mic CN Type: Audio jack CN Location: See Figure 3-15 The audio jacks co

TANK-700 Embedded SystemPage 28 3.9.6 Digital Input/Output Connector CN Label: DIO x 8 CN Type: DB-9 male connector CN Location: See Figure 1-3 CN

TANK-700 Embedded SystemPage iv Table of Contents 1 INTRODUCTION...

TANK-700 Embedded System Page 29Pin Description Pin Description 1 HDMI_DATA2 2 GND 3 HDMI_DATA2# 4 HDMI_DATA1 5 GND 6 HDMI_DATA1# 7 HDMI_DATA0 8 GN

TANK-700 Embedded SystemPage 30 Figure 3-18: LAN Connection Step 3: Insert the LAN cable RJ-45 connector. Once aligned, gently insert the LAN cabl

TANK-700 Embedded System Page 31Activity/Link LED Speed LED STATUS DESCRIPTION STATUS DESCRIPTION Off No link Off 10 Mbps connection Yellow L

TANK-700 Embedded SystemPage 32 The power connector connects to the 10.5V~36V DC power adapter. Figure 3-21: Power Input Connector Pin Description

TANK-700 Embedded System Page 333.9.12 RJ-45 RS-232 Serial Ports CN Label: RS 232 CN Type: RJ-45 CN Location: See Figure 1-2 CN Pinouts: See Table

TANK-700 Embedded SystemPage 34 Figure 3-24: RJ-45 RS-232 Serial Port Pinout Location Pin Description Pin Description 1 RI 5 RTS 2 DTR 6 RX 3.

TANK-700 Embedded System Page 353.9.13 RJ-45 RS-422/485 Serial Ports CN Label: RS 422/485 CN Type: RJ-45 CN Location: See Figure 1-2 CN Pinouts: Se

TANK-700 Embedded SystemPage 36 Figure 3-27: RJ-45 RS-422/485 Serial Port Pinout Location Pin Description Pin Description 1 N/A 5 N/A 2 TXD485#

TANK-700 Embedded System Page 373.9.14 RS-232 Serial Port Connectors CN Label: COM1, COM2, COM3 and COM4 CN Type: DB-9 connectors CN Location: See F

TANK-700 Embedded SystemPage 38 Pin Description Pin Description 1 DCD 6 DSR 2 RX 7 RTS 3 TX 8 CTS 4 DTR 9 RI 5 GND Table 3-11: Serial P

TANK-700 Embedded System Page v3.9.6 Digital Input/Output Connector... 28 3.9.7

TANK-700 Embedded System Page 39 Figure 3-31: USB Device Connection Step 3: Insert the device connector. Once aligned, gently insert the USB device

TANK-700 Embedded SystemPage 40 Step 1: Locate the female DB-15 connector. The location of the female DB-15 connector is shown in Figure 1-3. Step

TANK-700 Embedded System Page 41Pin Description Pin Description 1 RED 2 GREEN 3 BLUE 4 NC 5 GND 6 GND 7 GND 8 GND 9 VCC / NC 10 GND 11 NC 1

TANK-700 Embedded SystemPage 42 3.11 Redundant Power The TANK-700 is a system that supports redundant power. The redundant power input increases the

TANK-700 Embedded System Page 433.11.1 ACC ON NOTE: In ACC On mode, the Power 1 connector must connect to the ACC on signal to be able to control s

TANK-700 Embedded SystemPage 44 3.11.1.2 Switch to Backup Power During operation, system power will switch from Power 1 to Power 2 automatically whe

TANK-700 Embedded System Page 45 NOTE: To turn on the system in ATX power mode, press the Power button for three seconds. Press the Power button fo

TANK-700 Embedded SystemPage 46 3.11.2.2 Switch to Backup Power During operation, system power switches from Power 2 to Power 1 automatically when t

TANK-700 Embedded System Page 473.11.2.3 Shutdown The system will shutdown in the following situations:  Power 2 < 10.5V and Power 1 < 9V

TANK-700 Embedded SystemPage 48 Chapter 4 4 BIOS

TANK-700 Embedded SystemPage vi 4.3.4 SATA Configuration ... 5

TANK-700 Embedded System Page 494.1 Introduction The BIOS is programmed onto the BIOS chip. The BIOS setup program allows changes to certain system

TANK-700 Embedded SystemPage 50 Key Function Esc key Main Menu – Quit and not save changes into CMOS Status Page Setup Menu and Option Page Setup

TANK-700 Embedded System Page 514.2 Main The Main BIOS menu (BIOS Menu 1) appears when the BIOS Setup program is entered. The Main menu gives an ove

TANK-700 Embedded SystemPage 52 Î System Time [xx:xx:xx] Use the System Time option to set the system time. Manually enter the hours, minutes and s

TANK-700 Embedded System Page 534.3.1 ACPI Settings The ACPI Settings menu (BIOS Menu 3) configures the Advanced Configuration and Power Interface

TANK-700 Embedded SystemPage 54 4.3.2 Trusted Computing Use the Trusted Computing menu (BIOS Menu 4) to configure settings related to the Trusted Co

TANK-700 Embedded System Page 554.3.3 CPU Configuration Use the CPU Configuration menu (BIOS Menu 5) to view detailed CPU specifications and configu

TANK-700 Embedded SystemPage 56 Î Hyper-threading [Enabled] Use the Hyper-threading function to enable or disable the CPU hyper threading function

TANK-700 Embedded System Page 57Î SATA Controller(s) [Enabled] Use the SATA Controller(s) option to enable or disable the SATA controller. Î Enable

TANK-700 Embedded SystemPage 58 Î USB2.0 Support [Enabled] Use the USB2.0 Support option to enable or disable USB 2.0 support on the system. Î Disa

TANK-700 Embedded System Page viiB.1 SAFETY PRECAUTIONS...1

TANK-700 Embedded System Page 594.3.6 Second Super IO Configuration Use the F81216 Second Super IO Configuration menu (BIOS Menu 8) to set or change

TANK-700 Embedded SystemPage 60 4.3.6.1.1 Serial Port 7 Configuration Î Serial Port [Enabled] Use the Serial Port option to enable or disable the s

TANK-700 Embedded System Page 61Î Device Mode [Normal] Use the Device Mode option to enable or disable the serial port. Î Normal DEFAULT Sets the s

TANK-700 Embedded SystemPage 62 Î IO=3E8h; IRQ=3, 4, 5, 6, 7, 9, 10, 11, 12 Serial Port I/O port address is 3E8h and the interrupt address is IRQ3,

TANK-700 Embedded System Page 634.3.7.1 Serial Port n Configuration Use the Serial Port n Configuration menu (BIOS Menu 11) to configure the serial

TANK-700 Embedded SystemPage 64 Î IO=3F8h; IRQ=3, 4 Serial Port I/O port address is 3F8h and the interrupt address is IRQ3, 4 Î IO=2F8h; IRQ=3, 4

TANK-700 Embedded System Page 65Î IO=2C8h; IRQ=3, 4 Serial Port I/O port address is 2C8h and the interrupt address is IRQ3, 4 4.3.7.1.3 Serial Por

TANK-700 Embedded SystemPage 66 4.3.7.1.4 Serial Port 4 Configuration Î Serial Port [Enabled] Use the Serial Port option to enable or disable the s

TANK-700 Embedded System Page 67Î Change Settings [Auto] Use the Change Settings option to change the serial port IO port address and interrupt add

TANK-700 Embedded SystemPage 68 Î Auto DEFAULT The serial port IO port address and interrupt address are automatically detected. Î IO=2E0h; IRQ=10

TANK-700 Embedded SystemPage viii List of Figures Figure 1-1: TANK-700...

TANK-700 Embedded System Page 694.3.8 H/W Monitor The H/W Monitor menu (BIOS Menu 12) shows the operating temperature, fan speeds and system voltage

TANK-700 Embedded SystemPage 70 4.3.9 Serial Port Console Redirection The Serial Port Console Redirection menu (BIOS Menu 13) allows the console re

TANK-700 Embedded System Page 71Î Disabled DEFAULT Disabled the console redirection function Î Enabled Enabled the console redirection function Î

TANK-700 Embedded SystemPage 72 4.3.10 iEi Feature Use the iEi Feature menu (BIOS Menu 14) to configure the iEi features. Aptio Setup Utility – Copy

TANK-700 Embedded System Page 734.4 Chipset Use the Chipset menu (BIOS Menu 15) to access the Northbridge and Southbridge configuration menus. WARN

TANK-700 Embedded SystemPage 74 4.4.1 NorthBridge Configuration Use the NorthBridge Configuration menu (BIOS Menu 16) to configure the Northbridge c

TANK-700 Embedded System Page 75Î DVMT Pre-Allocated [64 M] Use the DVMT Pre-Allocated option to specify the amount of system memory that can be us

TANK-700 Embedded SystemPage 76 Î 480 M 480 MB of memory used by internal graphics device Î 512 M 512 MB of memory used by internal graphics dev

TANK-700 Embedded System Page 77Aptio Setup Utility – Copyright (C) 2010 American Megatrends, Inc. Chipset SouthBridge Configuration

TANK-700 Embedded SystemPage 78 Î Wake on GbE LAN [Disabled] Use the Wake on GbE LAN option to enable or disable resuming from GbE LAN controller.

TANK-700 Embedded System Page ixFigure 3-26: RJ-45 RS-422/485 Serial Device Connection...35 Fig

TANK-700 Embedded System Page 79Î Power Saving Function [Disabled] Use the Power Saving Function BIOS option to enable or disable the power saving

TANK-700 Embedded SystemPage 80 Î Un-Configure ME [Disabled] Use the Un-Configure ME option to perform ME un-configure without password operation.

TANK-700 Embedded System Page 81Î Off Does not enable the keyboard Number Lock automatically. To use the 10-keys on the keyboard, press the Number

TANK-700 Embedded SystemPage 82 Î User Password Use the User Password to set or change a user password. 4.7 Exit Use the Exit menu (BIOS Menu 22)

TANK-700 Embedded System Page 83Î Save as User Defaults Use the Save as User Defaults option to save the changes done so far as user defaults. Î R

TANK-700 Embedded SystemPage 84 Appendix A A One Key Recovery

TANK-700 Embedded System Page 85A.1 One Key Recovery Introduction The IEI one key recovery is an easy-to-use front end for the Norton Ghost system b

TANK-700 Embedded SystemPage 86 A.1.1 System Requirement NOTE: The recovery CD can only be used with IEI products. The software will fail to run an

TANK-700 Embedded System Page 87 NOTE: Specialized tools are required to change the partition size if the operating system is already installed. A.

TANK-700 Embedded SystemPage 88 NOTE: Installing unsupported OS versions may cause the recovery tool to fail. A.2 Setup Procedure for Windows Prio