Iei-integration AFL-15A-N270 v1.03 User Manual download pdf (Page 66)

AFOLUX AFL-15A-N270 Panel PC

Page 66

 Only handle the edges of the PCB: - When handling the PCB, hold the PCB

by the edges.

5.3 Turn off the Power

WARNING:

Failing to turn off the system before opening it can cause permanent

damage to the system and serious or fatal injury to the user.

Before any maintenance procedures are carried out on the system, make sure the system

is turned off.

5.4 Opening the System

5.4.1 Removing the Back Panel

WARNING:

Over-tightening back cover screws will crack the plastic frame.

Maximum torque for cover screws is 5 kg-cm (0.36 lb-ft/0.49 Nm).

To access the AFL-15A-N270 internally the back panel must be removed. To remove the

back panel, please follow the steps below.

Step 1: Follow all anti-static procedures. See Section

5.2.

Step 2: Turn off the power. See Section

5.3.

Step 3: Remove the retention screws on the back. Remove the retention screws

(

Figure 5-1) from the rear panel.

1 2 ... 61 62 63 64 65 66 67 68 69 70 71 ... 158 159

No comments

Iei-integration AFL-15A-N270 v1.03 User Manual Page 66